1 9

OLYCOM

5-Port Gigabit PoE Switch, E-mark CE, Unmanaged, 4 × PoE af/at, 120W, DC48V Input, DIN-Rail

5-Port Gigabit PoE Switch, E-mark CE, Unmanaged, 4 × PoE af/at, 120W, DC48V Input, DIN-Rail

$43.99 USD
$45.00 USD $43.99 USD
Распродажа Продано
Introduction

  • The IM-WP054GE is a 5-port unmanaged industrial Gigabit PoE switch engineered for field deployments where simplicity, compact size, and direct DC48V integration matter more than managed features or fiber uplinks. 
  • With 4 × IEEE 802.3af/at PoE ports delivering up to 30W per port and a 120W total PoE budget — powered directly from a DC 48–52V input without an intermediate AC/DC converter — it slots cleanly into existing 48V infrastructure: CCTV power systems, VoIP distribution panels, and DC-powered field cabinets where a separate PoE injector or AC-powered switch would add unnecessary complexity and failure points.
  • At 114 × 93 × 35mm and just 0.35kg, it is one of the most compact industrial-grade PoE switches available at this PoE budget level. 
  • DIN-rail or wall-mount installation, zero-configuration plug-and-play operation, 6KV Ethernet surge protection, ±15KV ESD air discharge immunity, and a -40°C to +75°C operating range make it equally at home in a roadside CCTV cabinet, a factory floor junction box, or an outdoor field enclosure — anywhere that demands industrial robustness without the overhead of a managed platform.

Key Features

  • 4 × Gigabit PoE RJ45 (IEEE 802.3af/at, 30W/port) + 1 × Gigabit Uplink RJ45 — Full 1000Mbps auto-sensing on all 5 ports; automatic PD mode detection (Non-PoE / 802.3af / 802.3at) on every PoE port — no manual configuration, no risk of damaging non-PoE devices
  • 120W Total PoE Budget from DC 48–52V Direct Input — Designed to draw directly from 48V DC bus infrastructure; eliminates the AC/DC conversion stage and the associated failure point in deployments where 48V is already present at the cabinet or panel
  • PoE Budget Scales with Input Voltage:
  • DC 48V input → 120W total PoE budget
  • Reverse-connection protection on the DC input terminal — field wiring errors do not damage the unit
  • 6KV Ethernet Surge Protection — All RJ45 ports protected against high-voltage transients from outdoor cable runs, nearby switching equipment, and indirect lightning strikes
  • ±15KV ESD Air Discharge / ±6KV EFT / Surge Differential ±2KV / Common ±6KV — Full IEC 61000-4 series industrial EMC immunity; CE-EMC / CE-LVD EN IEC 62368-1 / FCC Class B certified
  • Unmanaged Plug-and-Play — Zero configuration required; powers up and operates immediately; no CLI, no Web GUI, no VLAN or QoS setup — the right choice for installers who need a device that works out of the box and stays working without ongoing management attention
  • 10Gbps Non-Blocking Switching / 14.88Mpps Forwarding Rate — Wire-speed Gigabit forwarding across all 5 ports simultaneously; no congestion under full PoE device load
  • Auto MDI/MDIX on All Ports — Plug-and-play copper wiring in any topology without crossover cables
  • Store-and-Forward Switching — Full frame integrity verification before forwarding; eliminates error propagation to connected PoE devices
  • IEEE 802.3x Flow Control — Prevents packet loss under high traffic load in full-duplex environments
  • -40°C to +75°C Operating Temperature — Certified for extreme cold and heat; suits outdoor enclosures, unheated factory floors, and vehicle-mounted applications
  • IP40 / DIN-Rail or Wall-Mount / 114 × 93 × 35mm / 0.35kg — Corrugated metal shell; dual mounting options; fits in the tightest cabinet spaces where larger switches cannot be installed
  • 3-Year Warranty + Lifetime Technical Support

Applications

  • 48V CCTV Power System Integration — The most direct use case: CCTV installations running on a centralized DC 48V power bus connect the IM-WP054GE directly to the bus at each distribution point, powering up to four IP cameras per switch without any AC/DC adapter, PoE injector, or additional power supply. The 120W budget covers four simultaneous 802.3at cameras at full load; 6KV surge protection handles outdoor cable runs between the cabinet and camera mounting points; unmanaged operation means the installer connects cables and walks away
  • Roadside & Perimeter Surveillance Cabinets — Pole-mounted and roadside enclosures for traffic cameras, junction surveillance, and perimeter security typically have limited space and an existing 48V DC supply for communications equipment. The IM-WP054GE's compact 114 × 93 × 35mm footprint, DIN-rail or wall-mount flexibility, and direct 48V input make it a natural fit — no AC mains required, no inverter, no additional hardware in an already-crowded enclosure
  • Solar-Powered Remote Monitoring Sites — Off-grid solar installations for pipeline telemetry, environmental monitoring, and remote area surveillance typically regulate output to 48V DC. The IM-WP054GE accepts this directly, distributing PoE power to cameras, sensors, and wireless radios at the site without the energy losses of an AC conversion stage — extending effective PoE availability from the available solar harvest
  • Vehicle-Mounted & Mobile Surveillance Networks — Transit vehicles, command vehicles, and mobile surveillance platforms operating on 48V DC electrical systems connect the IM-WP054GE directly to the vehicle power bus, powering onboard IP cameras, passenger information terminals, and wireless APs without a separate AC inverter or power supply — reducing weight, complexity, and points of failure in a mobile installation
  • VoIP & Unified Communications Distribution Panels — Enterprise and carrier VoIP infrastructure already running on 48V DC plant power integrates the IM-WP054GE directly at the distribution frame, powering IP phones and SIP terminals over standard Cat5e/6 without breaking out to AC power at each endpoint — the same 48V bus that powers the telephony equipment powers the switch that connects it
  • Factory Floor & Industrial Automation Edge Nodes — In factory automation environments where 48V DC is the standard supply voltage for control and instrumentation equipment, the IM-WP054GE powers PoE-enabled sensors, barcode scanners, RFID readers, and IP cameras directly from the automation panel's DC bus — eliminating AC power drops to individual devices and simplifying cable management on the factory floor
  • Building Automation & Access Control Panels — Access control systems, IP intercom networks, and building management sensor nodes that run on 48V DC infrastructure use the IM-WP054GE to distribute PoE to door controllers, card readers, and IP cameras at each floor or zone panel — without requiring a separate AC power outlet at every distribution point in the building riser
Просмотреть всю информацию