1 4

OLYCOM

8 Port Fast Ethernet PoE Network Switch Gigabit Uplink 120W Unmanaged Fanlass CE FCC

8 Port Fast Ethernet PoE Network Switch Gigabit Uplink 120W Unmanaged Fanlass CE FCC

$29.99 USD
$36.99 USD $29.99 USD
Распродажа Продано
Introduction

  • The Olycom OM01008-PSE-FE is a 10-port unmanaged Fast Ethernet PoE switch combining 8 × 10/100M PoE access ports and 2 × 10/100M uplink ports in a compact, fanless metal housing — a straightforward, reliable access-layer solution for small-to-medium deployments where plug-and-play simplicity and consistent PoE delivery are the priority.
  • Built with high-speed network ICs and a stable PoE chipset, it supports IEEE 802.3af/at with a 120W total PoE budget, automatically detecting and powering compliant devices while passing data-only to non-PoE equipment with no manual configuration required. 
  • Three DIP switch–selectable modes — Normal, VLAN, and Extend (250m @ 10Mbps) — give installers the flexibility to handle standard office runs, security-isolated camera networks, and long-distance endpoint placements from a single, standardized platform. 
  • The silent fanless design and all-metal chassis make it equally suitable for quiet office environments and always-on surveillance closets running 24/7.

Key Features

  • 8 × 10/100M PoE Ports + 2 × 10/100M Uplink Ports — Eight auto-detecting PoE access ports for powered endpoints, plus two Fast Ethernet uplinks for connection to a core switch or router
  • IEEE 802.3af/at Auto-Detection, 120W Total Budget — Per-port detection automatically delivers up to 15.4W (af) or 30W (at) based on the connected device’s requirement; non-PoE devices receive data only with no risk of unintended power delivery
  • Three DIP Switch Operating Modes:
Normal Mode — Standard 100Mbps full-speed transmission up to 100m with full PoE delivery on all active ports
VLAN Mode — Isolates every access port from its neighbors while maintaining uplink connectivity; prevents camera-to-camera or device-to-device lateral traffic for enhanced network security in surveillance and shared-access deployments
Extend Mode — Drops to 10Mbps to extend PoE transmission range up to 250m over Cat5e/6, enabling endpoint placement well beyond the standard 100m Ethernet distance limit without additional extenders
  • Auto MDI/MDIX on All Ports — Connects any device with any cable type; crossover cables never required
  • IEEE 802.3x / Back Pressure Flow Control — Prevents packet loss under high traffic load in both full and half duplex environments
  • Store-and-Forward Switching — Full frame integrity verification before forwarding reduces error propagation across the network
  • Full Panel LED Indicators — Per-port link, speed, and PoE status LEDs provide instant visual fault diagnosis without management access or software tools
  • Fanless Silent Operation — No moving parts; maintenance-free and noise-free for 24/7 always-on deployments in offices, retail spaces, and surveillance closets
  • All-Metal Chassis with Rack-Mount Ears — Robust metal enclosure provides EMI shielding and physical durability; ships with mounting ears for standard 19-inch chassis or rack installation

Applications

  • IP Surveillance & CCTV Systems — Powers and connects IP cameras in small-to-medium surveillance installations across retail stores, office buildings, warehouses, and residential complexes. VLAN mode isolates each camera port, preventing lateral movement between devices and containing any compromised endpoint to a single port — a critical security practice in always-on camera networks. Extend mode handles perimeter or entry-point cameras placed beyond 100m from the wiring closet without additional hardware
  • Wireless AP Deployments — Feeds ceiling-mounted or wall-mounted Wi-Fi APs via a single Cat5e cable carrying both data and power, eliminating local power outlets at each AP location. Suitable for office floors, hotel corridors, classroom buildings, and retail environments where AP placement is dictated by coverage requirements rather than power outlet availability
  • VoIP & IP Communications — Simultaneously powers and connects IEEE 802.3at-compliant IP desk phones, video conferencing endpoints, and SIP intercoms across small office floors and branch locations, with flow control ensuring voice traffic is never dropped under load
  • Access Control & Building Security — Powers door controllers, card readers, electric strikes, and IP video intercoms from the same Cat5e infrastructure carrying data, replacing two separate cable runs — power and data — with one. Suitable for office entry points, server room access, and multi-door building security installations
  • IoT Sensor Networks — Provides reliable PoE connectivity for building automation sensors, environmental monitors, occupancy detectors, and smart lighting controllers in commercial buildings and industrial facilities where low-power IEEE 802.3af devices are distributed across a floor or zone
  • Industrial Parks & Factory Environments — Deployed at the access or convergence layer of industrial LAN infrastructure to connect networked devices, IP cameras, and wireless APs across production floors, logistics areas, and administrative buildings. The all-metal housing and fanless design handle the dust and temperature variation common in light industrial environments
  • SMB & Branch Office Networks — A cost-effective, zero-configuration access switch for small business locations, retail branches, and satellite offices where IT resources are limited and a reliable plug-and-play PoE solution is needed to support phones, APs, and cameras on a single platform
  • Hotels & Hospitality Venues — VLAN mode isolates guest-facing ports from each other, meeting the client isolation requirement for hospitality Wi-Fi and in-room IP devices without requiring a managed switch, making it an installer-friendly solution for smaller hotel properties and serviced apartment buildings
Просмотреть всю информацию