1 9

OLYCOM

8 Port DIN PoE Switch Gigabit Ethernet Dual-Fiber Backbone for Outdoor & Transit Networks

8 Port DIN PoE Switch Gigabit Ethernet Dual-Fiber Backbone for Outdoor & Transit Networks

$99.99 USD
$99.99 USD
Sale Sold out
Introduction

  • Where most industrial fiber switches force a choice between fiber uplink redundancy and PoE port density, the Olycom IM-FP288GE delivers both without compromise. 
  • As a 10-port industrial PoE fiber switch with 2 × 1000Mbps SFP fiber uplinks and 8 × Gigabit PoE RJ45 ports, it is designed for deployments where a single fiber uplink is not enough — ring topologies, daisy-chain networks, and dual-homed architectures that demand a second fiber path for automatic failover and continuous availability.
  • Every one of the eight copper ports carries full IEEE 802.3af/at PoE with a 240W total power budget and 30W per port, fed by a dedicated 48V PoE input that keeps the switching and power delivery subsystems independent. 
  • Paired with a 20Gbps non-blocking fabric, 6KV surge protection, and the same full industrial certification stack — NEMA-TS2, EN 50121-4, IEC 60068 vibration/shock/freefall, and Level 3 EMS immunity across all IEC 61000-4 categories — it is built to anchor the most demanding nodes in transportation, surveillance, and industrial automation networks where both uplink redundancy and high-density powered access are non-negotiable.

Key Features

  • 2 × 1000Mbps SFP Fiber Uplink Ports — Dual fiber ports enable ring topology, dual-homing, and daisy-chain network architectures; supports single-mode (1310/1550nm up to 20km; 1490/1550nm up to 40–120km) and multimode (1310nm up to 2km; 850nm up to 500m) transceivers
  • 8 × 10/100/1000Mbps PoE RJ45 Ports — All Ports Active — Every copper port delivers IEEE 802.3af (15.4W) or 802.3at (30W) PoE; auto-detects powered device standard per port with no manual configuration; non-PoE devices receive data only
  • 240W Total PoE Budget / 30W Per Port — Dedicated 48V PoE power input keeps switching and power delivery subsystems separate; sufficient headroom to simultaneously run eight 802.3at devices at full draw
  • 20Gbps Non-Blocking Switching Fabric / 14.88Mpps Forwarding Rate — Wire-speed performance across all ten ports simultaneously; 4K MAC table and 1.75MB packet buffer absorb traffic bursts without frame loss
  • 6KV Ethernet Surge Protection — Industrial-grade lightning and transient protection on all copper ports; critical for outdoor enclosures, pole-mount installations, and exposed field equipment subject to direct or induced lightning events
  • NEMA-TS2 Traffic Control Certified — Meets US traffic control system electromagnetic and environmental qualification requirements for roadside cabinet and intersection deployment
  • EN 50121-4 Rail Traffic Certified — Qualified for trackside wayside and onboard rolling stock applications under European railway EMC standards
  • IEC 60068-2-6/27/32 Vibration, Shock & Freefall Certified — Mechanically validated for continuous vibration, impact events, and transport handling; essential for vehicle-mounted and trackside installations
  • Level 3 EMS Immunity: EN 61000-4-2/3/4/5/6/8 — Full industrial electromagnetic immunity suite covering ESD, radiated susceptibility, EFT, surge, conducted susceptibility, and power frequency magnetic field
  • EMI: FCC Part 15 Class A & EN 55022 Class A — Industrial EMC classification for deployment in Class A environments
  • -40°C to +75°C Operating Temperature — Cold-start rated and sustained high-temperature capable with no derating and no fan dependency
  • IP40-Rated Corrugated Metal Housing — 158 × 115 × 60mm; DIN-rail or wall-mount; CE / LVD EN60950 safety certified
  • 1-Year Replacement / 3-Year Repair Warranty

Applications

  • Fiber Ring & Redundant Network Topologies — The defining use case for dual-SFP industrial switches: the IM-FP288GE sits as an active node in a fiber ring, with one SFP connecting upstream and the other downstream. If either fiber segment fails, traffic automatically reroutes through the surviving path — keeping all eight PoE endpoints online without manual intervention. Indispensable for surveillance rings, factory automation loops, and any infrastructure where a single fiber cut cannot be allowed to cause an outage
  • Intelligent Transportation & Smart Highway Infrastructure — NEMA-TS2 certification positions the IM-FP288GE directly inside traffic signal control cabinets, tunnel monitoring enclosures, and highway surveillance nodes. Eight PoE ports simultaneously power traffic cameras, environmental sensors, variable message signs, and communication modules from a single roadside enclosure, with dual SFP uplinks connecting the node into the backbone fiber ring running along the corridor
  • Railway Stations & Trackside Wayside Nodes — EN 50121-4 certification and IEC 60068 mechanical validation cover deployment in station equipment rooms, platform cabinets, and trackside relay houses. The dual fiber ports support ring-protected station area networks connecting passenger information displays, IP cameras, access control, and communication equipment, with PoE eliminating local power supplies for each endpoint
  • Outdoor Perimeter & Critical Infrastructure Surveillance — Powers dense camera clusters at perimeter security installations — airports, ports, power plants, data centers, and government facilities — where the combination of 240W PoE budget, dual-fiber ring protection, 6KV surge immunity, and extreme temperature tolerance delivers the reliability profile that critical infrastructure operators require and commercial switches cannot match
  • Industrial Automation Hub Nodes — Deployed as the primary fiber termination and PoE distribution point inside large automation cabinets on production lines, connecting machine vision cameras, wireless APs for mobile device connectivity, industrial routers, and IP-based safety light curtain controllers — all powered and connected through a single DIN-rail mounted unit in the panel
  • Substation & Utility Grid Edge Nodes — Level 3 EMS immunity across all IEC 61000-4 categories makes the IM-FP288GE suitable for protection relay panels and RTU enclosures at electrical substations, where the electromagnetic environment from high-voltage switching events exceeds what most industrial switches are rated to withstand. Dual SFP ports connect into substation fiber rings with automatic path redundancy
  • Mining, Tunneling & Underground Networks — Shock and vibration certification combined with the wide temperature range covers deployment in underground mining infrastructure, tunnel boring machine control systems, and subsurface communications networks where access for maintenance is infrequent and long uninterrupted operating life is the primary requirement
View full details