1 6

OLYCOM

Fast Ethernet PoE Switch, 1 × 100M SFP + 2 × PoE af/at, for Legacy & Cost-Sensitive Networks

Fast Ethernet PoE Switch, 1 × 100M SFP + 2 × PoE af/at, for Legacy & Cost-Sensitive Networks

$45.99 USD
$36.50 USD $45.99 USD
Sale Sold out
Introduction

  • Not every field network runs at Gigabit speeds — and not every deployment budget should pay for Gigabit hardware. 
  • The IM-FP122FE is a 100Mbps industrial PoE fiber switch built for the substantial installed base of Fast Ethernet infrastructure that remains active across surveillance networks, transit systems, building automation, and process control environments where 100Mbps is sufficient for the connected devices and a Gigabit upgrade carries unjustifiable cost.
  • With 1 × 100M SFP fiber port and 2 × IEEE 802.3af/at PoE RJ45 ports, it slots directly into existing 100Mbps fiber backbone segments — no speed negotiation issues, no compatibility concerns with 100BASE-FX or 100BASE-LX optical infrastructure already in the field — while delivering up to 30W PoE to each copper port for IP cameras, wireless APs, and access control devices. 
  • At 113.8 × 93 × 34.9mm, it is the most compact form factor in the IM-FP series, fitting in pole cabinets, street furniture enclosures, and junction boxes too small for larger devices. 6KV Ethernet surge protection, IEC 61000-4 Level 3 EMC immunity, NEMA-TS2 traffic control and EN 50121-4 railway certifications, and a -40°C to +75°C operating range bring full industrial hardening to a device that makes economic sense precisely because it does not over-specify the network layer for applications where Fast Ethernet is the right fit.

Key Features

  • 1 × 100M SFP Fiber + 2 × 10/100M PoE RJ45 — 100Mbps Native, No Gigabit Overhead — Direct compatibility with 100BASE-FX, 100BASE-LX, 100BASE-EX, and 100BASE-BX fiber infrastructure; connects into existing Fast Ethernet backbone segments without requiring upstream switch upgrades or speed-matching configuration; SM (20–120km) and MM (2km) SFP modules supported
  • IEEE 802.3af/at PoE on Both RJ45 Ports (15.4W / 30W per port) — Automatic PD classification powers standard PoE and PoE+ endpoints; 100Mbps access bandwidth is sufficient for HD IP cameras, standard wireless APs, VoIP phones, and access control devices that do not require Gigabit throughput — the majority of deployed PoE field devices in legacy and cost-sensitive networks
  • Smallest Form Factor in the IM-FP Series: 113.8 × 93 × 34.9mm — Fits in pole-top enclosures, roadside signal boxes, and building junction housings where no larger industrial switch can be physically accommodated; DIN-rail or wall-mount installation
  • 6KV Ethernet Surge Protection — Both RJ45 ports hardened against high-voltage transients; critical for the outdoor copper runs between the switch and pole-mounted or building-exterior PoE endpoints in legacy surveillance and transportation networks
  • IEC 61000-4 Full Level 3 EMC Immunity — ESD / Radiated Immunity / EFT / Surge / Conducted Immunity all at Level 3; CE-EMC / CE LVD EN60950 / FCC Class A certified
  • NEMA-TS2 Traffic Control Certified — Direct qualification for roadside traffic infrastructure procurement; matches the 100Mbps speed tier of most installed traffic control fiber infrastructure, which was designed and deployed before Gigabit became the access standard
  • EN 50121-4 Railway Certified — Validated for trackside and station environments; compatible with 100Mbps railway fiber backbone segments in transit systems installed prior to Gigabit migration
  • IEC 60068 Mechanical Certifications — Vibration / Freefall / Shock tested; qualified for transportation and heavy-vibration deployment
  • DC 48V Input (max 52V) / Reverse-Connection Protection — Direct 48V DC plant integration; hardware polarity protection on the input terminal
  • 40Gbps Switching Fabric / 4Mb Packet Buffer — Internal switching capacity far exceeds what two 100Mbps ports can generate; zero internal congestion regardless of traffic load
  • IP40 / DIN-Rail or Wall-Mount / 3-Year Warranty

Applications

  • Legacy Surveillance Network Refresh Without Infrastructure Replacement — Large-scale CCTV installations from the 2010s were built on 100Mbps fiber backbone infrastructure and connected cameras that generate streams well within 100Mbps bandwidth. Replacing every fiber switch node with Gigabit hardware when the cameras, fiber, and upstream infrastructure remain 100Mbps is a cost that delivers no operational benefit. The IM-FP122FE replaces aging commercial-grade 100Mbps PoE fiber nodes with industrial-hardened equivalents — extending infrastructure life, adding 6KV surge protection and -40°C temperature rating that the original commercial hardware never had, without triggering a full network upgrade
  • Roadside Traffic Nodes on 100Mbps Fiber Rings — The majority of highway and urban traffic management fiber rings installed before 2015 operate at 100Mbps. Speed cameras, loop detectors, and intersection control equipment on these networks generate traffic well within Fast Ethernet capacity. The IM-FP122FE's NEMA-TS2 certification and native 100Mbps fiber compatibility make it the direct replacement for failed or end-of-life commercial media converters and PoE injectors at roadside cabinets — without triggering the civil works and fiber replacement that a Gigabit migration would require
  • Railway Station Nodes on Installed 100Mbps Backbone — Transit systems built on 100Mbps fiber backbone — common in metro networks commissioned before 2012 — use the IM-FP122FE to replace commercial-grade equipment at station nodes with EN 50121-4 certified industrial hardware. Platform cameras, passenger counters, and access control readers on these networks operate comfortably within 100Mbps; the switch delivers the required bandwidth and PoE power in the smallest possible chassis for station junction box installations
  • Building Automation & Access Control on 100Mbps Infrastructure — Commercial buildings and government facilities wired with 100Mbps fiber between floors and buildings connect access control readers, IP intercoms, and corridor cameras that have no requirement for Gigabit bandwidth. The IM-FP122FE serves as the floor or zone fiber node in these buildings — two PoE devices powered and connected per unit, sized to fit the compact junction boxes and cable trays of established building infrastructure where replacing fiber for a Gigabit upgrade is not a viable option
  • Cost-Optimized New Deployments with 100Mbps Endpoints — In new installations where the connected devices — standard HD cameras, single-radio APs, VoIP phones, card readers — operate at 100Mbps and Gigabit throughput adds no value, specifying the IM-FP122FE over a Gigabit alternative reduces per-node hardware cost without any functional trade-off. For large distributed networks with hundreds of two-device nodes, the cumulative savings over Gigabit hardware are significant while the industrial certifications, temperature rating, and surge protection remain identical
  • Pole-Top & Street Furniture Minimal-Footprint Nodes — At pole-top mounting locations and street furniture installations where cabinet space is physically limited to one compact DIN-rail module, the IM-FP122FE's 113.8 × 93 × 34.9mm footprint is the enabling factor — it fits where no other industrial PoE fiber switch in the lineup does. For legacy 100Mbps surveillance cameras and traffic sensors at these locations, the speed tier is the right match and the compact form factor resolves the installation constraint that a larger Gigabit switch cannot
View full details