1 4

OLYCOM

Olycom 24 Port 100M PoE Switch 280W VLAN 250 PoE Distance Unmanaged

Olycom 24 Port 100M PoE Switch 280W VLAN 250 PoE Distance Unmanaged

$99.99 USD
$109.99 USD $99.99 USD
할인 품절
Introduction

  • The Olycom OM12624G-PSE-FE is a 27-port unmanaged PoE switch built for medium-to-large surveillance and enterprise access deployments that demand high port density, generous PoE headroom, and flexible distance options — all without the overhead of a managed platform.
  • With 24 × Fast Ethernet PoE ports, 2 × Gigabit RJ45 uplinks, and 1 × Gigabit SFP uplink, it delivers a 280W total PoE budget across IEEE 802.3af/at endpoints, a 10.8Gbps switching fabric, and support for jumbo frames up to 9KB — well beyond what entry-level PoE switches offer at this port count. 
  • Three DIP switch–selectable modes — VLAN isolation, Standard 100m, and Extend 250m — give installers the tools to handle everything from dense camera clusters in a single building to distributed endpoints spread across a large site, all from one standardized platform with a 100,000-hour MTBF and rack-ready metal housing built for permanent infrastructure deployment.

Key Features

  • 27-Port Architecture: 24 × PoE + 2 × Gigabit RJ45 + 1 × Gigabit SFP — High port density with dual copper Gigabit uplinks and an SFP fiber slot for flexible backbone connectivity via copper or fiber
  • 280W Total PoE Budget — IEEE 802.3af (15.4W) and 802.3at (30W) per-port auto-detection across all 24 PoE ports; sufficient headroom to simultaneously run a full mix of cameras, APs, and VoIP phones at scale
  • Three DIP Switch Operating Modes:
OFF (Default) Mode — Standard full-speed 100Mbps operation up to 100m; all ports communicate freely with full PoE delivery
VLAN Mode — Port isolation separates every access port from its neighbors while maintaining uplink connectivity; critical for CCTV networks where camera-to-camera communication is a security risk, and for multi-tenant or hospitality environments where client isolation is required
Extend Mode — Reduces speed to 10Mbps to push PoE transmission up to 250m over Cat5e/6, enabling camera or AP placement far beyond standard Ethernet distance limits without additional extenders or media converters
  • 10.8Gbps Switching Capacity / 8.035Mpps Forwarding Rate — Non-blocking wire-speed performance across all 27 ports prevents congestion even under simultaneous full-load traffic from all connected PoE devices
  • 1.5Mbit Packet Buffer — Absorbs traffic bursts from multiple simultaneously active cameras or APs without dropping frames
  • Jumbo Frame Support up to 9KB — Handles large frame payloads from high-resolution IP cameras, NVRs, and storage systems without fragmentation overhead
  • Store-and-Forward Switching — Full frame integrity verification before forwarding; eliminates error propagation across the network
  • 1 × Gigabit SFP Uplink Slot — Connects to fiber backbone switches or core infrastructure over long distances, making this switch suitable for inter-floor or inter-building links as well as standard rack deployments
  • IEEE 802.3x Flow Control — Prevents packet loss under high traffic load in full duplex environments
  • 100,000-Hour MTBF — Long-term reliability rating minimizes maintenance and unplanned replacement across always-on surveillance and enterprise infrastructure
  • Metal Housing, Rack-Mount Ready — Robust all-metal enclosure with included rack-mount ears for standard 19-inch rack installation; built for permanent data center or wiring closet deployment
  • AC 100–240V Universal Input — Compatible with global power standards; no region-specific power supply required

Applications

  • Large-Scale CCTV & IP Surveillance Networks — The combination of 24 PoE ports, 280W budget, VLAN isolation mode, and 250m Extend mode makes this switch a natural fit for medium-to-large camera deployments in warehouses, logistics centers, commercial complexes, and campus perimeters. VLAN mode prevents any camera from communicating with another — containing a compromised device to a single port — while Extend mode eliminates the need for additional PoE extenders at distant mounting points
  • Enterprise & SMB Office Networks — Serves as a high-density access-layer switch powering VoIP phones, wireless APs, and networked devices across large open-plan offices, multi-floor buildings, and branch locations. The 280W PoE budget and dual Gigabit uplinks ensure the switch can handle a fully loaded floor without power throttling or uplink congestion
  • Wireless Network Infrastructure — Powers and connects high-density Wi-Fi AP deployments across hotels, conference centers, schools, and enterprise campuses. The SFP uplink allows direct fiber connection to the distribution layer, while the 10.8Gbps switching fabric ensures AP uplink bandwidth is never the limiting factor in a dense wireless environment
  • Hotel & Hospitality Networks — VLAN mode isolates each guest room or access point port from all others, meeting the client isolation requirement for hospitality Wi-Fi without a managed switch. The high port count covers an entire floor from a single wiring closet installation, and the SFP slot connects cleanly to the property’s fiber backbone
  • Government & Public Sector Facilities — Provides a reliable, high-density PoE access layer for government offices, courthouses, municipal buildings, and public safety facilities where IP cameras, access control panels, VoIP terminals, and network devices all share a common wiring infrastructure and uptime is a non-negotiable requirement
  • Education & Campus Deployments — Powers IP cameras, wireless APs, IP intercoms, and digital displays across school buildings and university facilities. Extend mode is particularly valuable on large campuses where outdoor cameras or remote classroom APs are situated well beyond 100m from the nearest IDF or MDF closet
  • Transportation Hubs & Public Infrastructure — Deployed in airport terminals, train stations, bus depots, and metro systems to power and connect surveillance cameras, passenger information displays, and access control systems across large distributed environments where long cable runs and high device counts are the norm
  • VoIP & Unified Communications Rollouts — Simultaneously powers large phone deployments across call centers, corporate offices, and contact facilities, with IEEE 802.3at ensuring higher-power IP conference phones and video endpoints receive full power without manual port configuration
전체 세부 정보 보기