1 5

OLYCOM

Olycom 18 Port Full Gigabit PoE Fiber Switch 300W PoE Budget Rackmount CE

Olycom 18 Port Full Gigabit PoE Fiber Switch 300W PoE Budget Rackmount CE

$89.99 USD
$99.99 USD $89.99 USD
할인 품절
Introduction

  • The Olycom OM21616-PSE-GE is an 18-port full Gigabit PoE switch that brings high port density, fiber uplink flexibility, and intelligent operating modes together in a single 1U rackmount chassis — the natural step up for deployments that have outgrown 8-port access switches and need a centralized, high-capacity PoE distribution point without crossing into fully managed complexity.
  • With 16 × Gigabit PoE ports delivering a 280W total budget and 2 × Gigabit SFP uplinks for fiber or copper backbone connectivity, it handles the simultaneous demands of a dense IP camera network, a floor-wide AP deployment, or a mixed VoIP and surveillance infrastructure from a single rack unit. A 36Gbps non-blocking switching fabric, 9.6KB jumbo frame support, and 8K MAC table give it the headroom to handle high-resolution video streams and bandwidth-intensive applications without queuing or congestion — while the DIP switch–selectable Default, VLAN, and Extend modes give installers the tools to handle security isolation and long cable runs without a management interface. 
  • The internal 52V power supply, fanless design, 100,000+ hour MTBF, and CE/FCC/RoHS certification complete a platform built for around-the-clock operation in enterprise, surveillance, and broadband access environments.

Key Features

  • 16 × Gigabit PoE Ports + 2 × Gigabit SFP Uplinks — Sixteen full-speed Gigabit PoE access ports for powered endpoints, plus two SFP slots for fiber or copper backbone uplinks; hybrid fiber-copper architecture in a single 1U chassis
  • 280W Total PoE Budget — IEEE 802.3af/at — Per-port auto-detection delivers 15.4W (af) or 30W (at) based on each connected device’s requirement; smart PD detection identifies PoE vs. non-PoE devices per port automatically; non-PoE devices receive data only with full protection
  • Three DIP Switch Operating Modes:
  • Default Mode — Full-speed Gigabit transmission up to 100m; all 16 PoE ports and 2 SFP uplinks communicate freely at maximum throughput
  • VLAN Mode — Isolates all 16 PoE access ports from each other while maintaining shared SFP uplink connectivity; enforces port-level client separation for IP surveillance networks, hospitality Wi-Fi, and multi-tenant environments without a managed switch
  • Extend Mode — Drops access ports to 10Mbps to push PoE transmission range up to 250m over Cat5e/6; serves camera and AP locations far beyond standard copper distance limits without additional extenders
  • 36Gbps Non-Blocking Switching Fabric — Wire-speed forwarding across all 18 ports simultaneously; no congestion or queuing under full concurrent load from all 16 PoE endpoints and both SFP uplinks
  • 9.6KB Jumbo Frame Support — Handles large video payloads from high-resolution IP cameras and NVRs without fragmentation overhead; essential for 4K surveillance streams and multi-channel video recording systems
  • 8K MAC Address Table / 4Mbit Packet Buffer — Sufficient for large LAN environments with hundreds of connected endpoints; 4Mbit buffer absorbs traffic bursts from simultaneous camera streams without dropping frames
  • 2 × Gigabit SFP Uplink Slots — Connect to fiber backbone switches, long-distance links, or copper Gigabit uplinks via standard SFP transceivers; eliminates the distance and interference limitations of copper-only uplink ports
  • Internal 52V / 5.76A Power Supply, AC 100–240V — Universal AC input eliminates external power bricks; built-in supply sized to support the full 280W PoE budget plus switching headroom
  • Fanless 24/7 Operation — No moving parts; silent, maintenance-free cooling suitable for open offices, server rooms, and noise-sensitive installations
  • MTBF > 100,000 Hours — Long-term reliability rating minimizes unplanned replacement across always-on surveillance and enterprise infrastructure
  • 1U Rackmount, 440 × 204 × 44mm — Standard 19-inch rack form factor; 2.73kg net weight; straightforward installation in any rack or cabinet
  • -10°C to +50°C Operating Temperature — Covers unconditioned wiring closets, building distribution rooms, and light industrial environments
  • CE / FCC / RoHS Certified — Full international electromagnetic, safety, and environmental compliance

Applications

  • Large-Scale IP Surveillance & CCTV Infrastructure — Sixteen Gigabit PoE ports with 280W budget, VLAN isolation mode, and 250m Extend mode make the OM21616-PSE-GE a purpose-designed access switch for dense camera deployments across commercial buildings, industrial facilities, logistics centers, and campus perimeters. VLAN mode prevents camera-to-camera lateral traffic — containing any compromised device to a single port — while Extend mode reaches cameras at loading docks, parking structures, and distant entry points that standard 100m copper runs cannot serve. Jumbo frame support ensures 4K and multi-megapixel streams move from camera to NVR without fragmentation
  • Enterprise Floor & Building Access Layer — Serves as a high-density Gigabit access switch for a full office floor or building wing, simultaneously powering VoIP phones, wireless APs, IP cameras, and networked devices from a single rack-mounted unit. The SFP uplinks connect to the building’s fiber backbone while the 36Gbps fabric ensures no port-to-port congestion even during peak business hours when all 16 endpoints are active simultaneously
  • Hospitality & Multi-Tenant Environments — VLAN mode isolates each guest room AP port or tenant access port from all others while maintaining shared uplink connectivity, meeting the client isolation requirement for hospitality Wi-Fi and co-working spaces without a managed switch. Sixteen ports cover a significant portion of a hotel floor or office suite from a single wiring closet installation, with SFP uplinks connecting cleanly to the property’s fiber distribution
  • ISP & Broadband Access Aggregation — The combination of 16 Gigabit subscriber ports, dual SFP uplinks for backbone fiber, and a 36Gbps non-blocking fabric positions the OM21616-PSE-GE as a capable FTTB/FTTH access or aggregation switch for ISPs serving multi-dwelling units, business parks, and campus broadband networks. Port density and PoE capability allow simultaneous data service and CPE power delivery from a single chassis at each distribution point
  • Education & Campus Networks — Powers and connects IP cameras, wireless APs, VoIP phones, and networked classroom devices across school and university buildings from a standardized rack-mounted platform. Extend mode is particularly valuable on large campuses where outdoor cameras, remote classroom APs, or sports facility endpoints sit beyond 100m from the nearest distribution closet, eliminating the need for additional infrastructure hardware at each distant location
  • Government, Public Safety & Smart City Infrastructure — Provides a high-density, certified Gigabit PoE access layer for government facilities, public safety command centers, and smart city distribution points where IP cameras, access control panels, public Wi-Fi APs, and IoT gateway devices all share a common wiring infrastructure. SFP uplinks connect each distribution point to the fiber backbone serving the wider network, while VLAN mode enforces traffic separation between different functional systems on the same physical switch
  • Healthcare & Hospital Networks — Simultaneously powers and segments clinical devices, IP cameras, nurse call terminals, and administrative workstations from a single rackmounted unit in a wiring closet serving an entire hospital wing. Jumbo frame support handles the large file transfers between medical imaging systems and PACS servers that share the same network infrastructure, while the fanless design eliminates the noise and vibration that fan-cooled equipment generates in clinical environments
전체 세부 정보 보기