1 7

OLYCOM

3-Port Gigabit PoE Fiber Switch, Mini Size, 2 × PoE RJ45, 30W/Port, 6KV Surge, Fanless

3-Port Gigabit PoE Fiber Switch, Mini Size, 2 × PoE RJ45, 30W/Port, 6KV Surge, Fanless

$45.89 USD
$36.50 USD $45.89 USD
할인 품절
Introduction

  • The IM-FP122GE is the smallest member of the IM-FP industrial PoE fiber switch family — a 3-port, single-SFP device purpose-built for the last segment of a fiber ring or star topology, where the network transitions from fiber backbone to copper PoE endpoints. 
  • With 1 × Gigabit SFP fiber port and 2 × IEEE 802.3af/at PoE RJ45 ports, it performs two functions simultaneously at the network edge: fiber-to-copper media conversion and PoE power delivery — eliminating the separate media converter and PoE injector that would otherwise occupy twice the cabinet space and introduce an additional failure point.
  • Where larger industrial PoE fiber switches serve as aggregation nodes for many devices, the IM-FP122GE is the terminal node — the device at the end of the fiber run that connects one or two field endpoints and nothing more. 
  • Its 113.8 × 93 × 34.9mm footprint is the smallest in the series, fitting inside pole-top enclosures, junction boxes, and field housings too small for any multi-port alternative. 
  • Backed by the same industrial credentials as its larger siblings — 6KV Ethernet surge protection, IEC 61000-4 Level 3 EMC immunity, NEMA-TS2, EN 50121-4 railway certification, and a -40°C to +75°C operating range — it brings full industrial robustness to the most space-constrained deployment points in distributed infrastructure.

Key Features

  • 1 × 1000M SFP Fiber Uplink + 2 × 10/100/1000M PoE RJ45 — Single fiber input fans out to two copper PoE endpoints; SM (20–120km) and MM (2km) SFP modules supported; BiDi single-fiber modules available for installations where fiber count is limited to one strand
  • IEEE 802.3af/at PoE on Both RJ45 Ports (15.4W / 30W per port) — Automatic PD classification on each port; powers IP cameras, wireless APs, VoIP terminals, and access control devices without a separate injector; non-PoE devices connect safely without risk of damage
  • Fiber-to-Copper + PoE in a Single Device — Replaces the two-device combination of an industrial media converter and a PoE injector with one compact unit; halves the DIN-rail space required, reduces the component count, and eliminates one power supply and one potential failure point at every terminal node
  • 113.8 × 93 × 34.9mm — Smallest Form Factor in the IM-FP Series — Fits in pole-top enclosures, traffic signal cabinets, outdoor junction boxes, and field housings where no multi-port industrial switch can be physically installed
  • 6KV Ethernet Surge Protection — Both RJ45 ports protected against high-voltage transients from outdoor cable runs and nearby electrical equipment; essential for pole-mounted and roadside installations exposed to indirect lightning
  • IEC 61000-4 Level 3 Full EMC Immunity — ESD Level 3 / Radiated Immunity Level 3 / EFT Level 3 / Surge Level 3 / Conducted Immunity Level 3; NEMA-TS2 traffic control / IEC 60068-2-6 vibration / IEC 60068-2-27 shock / IEC 60068-2-32 freefall / EN 50121-4 railway certified
  • DC 48V Input (max 52V) with Reverse-Connection Protection — Direct integration into 48V DC infrastructure; hardware-level polarity protection tolerates field wiring errors without damage
  • Store-and-Forward Switching / 40Gbps Fabric — Full frame integrity verification before forwarding; non-blocking switching capacity well in excess of what three ports can generate, ensuring no internal congestion regardless of traffic mix
  • Auto MDI/MDIX / IEEE 802.3x Flow Control — Plug-and-play copper wiring; flow control prevents frame loss under burst traffic from simultaneously active PoE devices
  • -40°C to +75°C / IP40 / DIN-Rail — Full industrial temperature range; corrugated metal shell rated IP40; standard 35mm DIN-rail mounting
  • CE / FCC Class A / LVD EN60950 / 3-Year Warranty

Applications

  • Fiber Ring Terminal Nodes — Single Camera or AP Endpoints — In G.8032 or star fiber deployments across industrial parks, campuses, and transportation infrastructure, the IM-FP122GE serves as the terminal node at each endpoint location: the fiber ring arrives at the pole or junction box, the IM-FP122GE terminates it, and one or two PoE devices connect locally. No further switching is needed at this point — the minimal port count is not a limitation but a precise match to the requirement, in a chassis small enough to mount inside the pole enclosure itself
  • Pole-Top Camera Installations Beyond Copper Range — Standard PoE switches reach 100m over copper. When a camera must be placed further from the nearest wiring closet — along a perimeter fence, at a highway overpass, or at the far end of a parking structure — a fiber run extends the reach to 20km or beyond, with the IM-FP122GE at the pole converting fiber back to PoE copper for the final connection to the camera. One fiber in, one camera powered and connected: the simplest possible architecture for long-distance single-camera deployment
  • Roadside Traffic & Highway Monitoring — NEMA-TS2 traffic control certification and EN 50121-4 railway compliance position the IM-FP122GE directly for roadside installations: speed cameras, red-light enforcement cameras, variable message sign controllers, and inductive loop processors mounted in standard roadside cabinets that have space for one compact DIN-rail module and a direct 48V DC supply, nothing more
  • Railway Trackside Signal & Camera Nodes — At trackside signal locations, passenger information display points, and level crossing control cabinets, fiber is the standard backhaul medium and cabinet space is governed by civil infrastructure dimensions rather than network equipment preferences. The IM-FP122GE's railway certification, compact footprint, and combined fiber conversion + PoE delivery eliminate the need for two separate devices in an enclosure designed for one
  • Building Riser & Floor Distribution Points — In multi-floor buildings where a fiber riser connects the MDF to each floor IDF, the IM-FP122GE terminates the riser fiber at small IDF locations — a corridor cabinet, a ceiling void enclosure, or a wall-box — and powers one or two local PoE devices such as a corridor camera and a wireless AP, without requiring a full-size managed switch at every riser termination point
  • Solar & Off-Grid Remote Monitoring Outposts — Remote environmental monitoring stations, pipeline telemetry points, and wildlife monitoring installations connected by long-haul fiber but powered by solar-derived 48V DC use the IM-FP122GE to terminate the fiber and power one or two local sensors or cameras — the minimum viable network node for a remote site, in the minimum viable physical footprint
  • Retail & Small Branch Fiber Handoff — Where a fiber handoff from an ISP or building landlord arrives at a small retail unit or branch office that needs only one or two PoE devices — a camera and a wireless AP — the IM-FP122GE converts the fiber to PoE copper without the cost or cabinet space of a larger managed switch, and without the complexity of a separate media converter and injector stack
전체 세부 정보 보기