1 6

OLYCOM

Managed Gigabit Fiber Switch ERPS G.8032 Ring SFP Uplink DIN Rail Compact Size

Managed Gigabit Fiber Switch ERPS G.8032 Ring SFP Uplink DIN Rail Compact Size

$65.99 USD
$36.50 USD $65.99 USD
セール 売り切れ
Introduction

  • Two numbers separate the IM-FS240GM from most managed industrial switches at this form factor: +85°C upper operating limit and 0.8W idle power consumption. 
  • The first matters in sealed enclosures — pole-top cabinets, underground junction housings, vehicle underbody panels — where solar loading, proximity to heat-generating equipment, or confined airflow pushes ambient temperatures beyond the +75°C ceiling that most industrial switches specify. 
  • The second matters in solar-powered, battery-backed, and energy-metered installations where every watt of standby load directly reduces available runtime or increases the required battery capacity.
  • Beyond these headline figures, the IM-FS240GM is a fully capable L2 managed industrial fiber switch: 2 × Gigabit SFP and 4 × Gigabit RJ45 on a 12Gbps non-blocking fabric with <5µs switching delay, ITU-T G.8032 ERPS ring protection, IEEE 802.1Q VLAN, QoS, IGMP Snooping, 802.1X security, and full SNMP v1/v2c/v3 / Web GUI / CLI / Telnet management — all in a 113.8 × 93 × 34.9mm chassis on a DC 9–52V ultra-wide input that accepts everything from 9V auxiliary supplies to 48V telecom plant.
  • NEMA-TS2, EN 50121-4, and IEC 60068 certifications cover traffic control, railway, and mechanical stress requirements. 
  • Where the unmanaged IM-FS240FE handles locations that need no visibility or control, the IM-FS240GM handles the ones that do — in exactly the same compact footprint, rated 10°C hotter.

Key Features

  • -40°C to +85°C Operating Range — 10°C Higher Than the Industry Standard — Certified for the full temperature envelope of sealed outdoor enclosures in direct sun, high-ambient industrial spaces, and vehicle installations where internal cabinet temperatures routinely exceed the +75°C ceiling of conventional industrial switches; storage rated to +85°C as well, eliminating concern over shipping and warehousing in hot climates
  • 0.8W Idle Power Consumption — The Lowest in the IM Series — Standby draw of 0.8W directly extends battery runtime at off-grid sites, reduces thermal load inside sealed enclosures at high ambient temperatures, and lowers operating cost across large networks of always-on field nodes; relevant wherever the power budget per node is constrained
  • DC 9–52V Ultra-Wide Input with Redundant Protection — The broadest DC input range in the IM lineup; accepts 9V auxiliary battery systems, 12V vehicle power, 24V automation bus, and 48V telecom plant without a dedicated converter; redundant dual input, overload protection, and reverse-connection protection on the terminal block
  • 2 × 1000M SFP + 4 × 10/100/1000M RJ45 — Full Gigabit on all ports; SM (20–120km) and MM (2km) SFP modules supported; BiDi single-fiber compatible; 12Gbps non-blocking fabric with <5µs forwarding delay
  • ITU-T G.8032 ERPS Ring Protection — Sub-50ms ring recovery; bus, star, and ring topologies supported; ring management visible through Web GUI and SNMP without CLI knowledge — accessible to field engineers who are not network specialists
  • Full L2 Management Feature Set:
  • VLAN: 802.1Q Tag VLAN (4K) + Port-based VLAN; traffic segmentation without separate hardware
  • QoS: 802.1p; 4 priority queues per port; port default priority marking; CAR speed limiting at 1Kbps step granularity
  • Security: 802.1X port/MAC authentication; MAC address filtering; IP+MAC+port binding (manual and auto-scan); ARP speed limiting; port loop detection; DDOS defense; HTTPS / SSH v2
  • Multicast: IGMPv1/v2/v3 Snooping; broadcast, multicast, and unknown unicast storm suppression
  • Link Aggregation: Static LACP; port isolation and aggregation management
  • DHCP: Snooping + Option 82
  • Management: Web GUI, CLI, Telnet, Windows utility, SNMP v1/v2c/v3, MIB-II, SNTP, port mirroring (one-way and two-way), Ping/tracert, Syslog, reset to default
  • 4KV Ethernet Surge Protection — RJ45 ports protected against outdoor transients; rated for the surge environment of transportation and industrial field installations
  • IEC 61000-4 Level 3 Full EMC Suite — ESD / Radiated Immunity / EFT / Surge / Conducted Immunity all at Level 3; FCC Class A / CE-EMC / CE LVD EN60950
  • NEMA-TS2 + EN 50121-4 + IEC 60068 — Traffic control, railway, vibration, shock, and freefall certifications
  • 113.8 × 93 × 34.9mm / IP40 / DIN-Rail — Identical footprint to the unmanaged IM-FS240FE; managed capability added without chassis size increase

Applications

  • The IM-FS240GM is selected over its unmanaged counterpart in three specific circumstances: when the network requires traffic segmentation or QoS at the edge node, when SNMP visibility into individual field nodes is operationally required, or when the installation environment exceeds +75°C. 
  • Any one of these conditions justifies the managed variant; the form factor and power consumption remain identical.
  • High-Temperature Sealed Enclosure Nodes — Solar-loaded roadside cabinets, roof-mounted junction boxes, and vehicle underbody enclosures in hot climates routinely reach internal temperatures of 75–85°C during peak summer conditions. The IM-FS240GM operates continuously through this range where most industrial switches shut down on thermal protection or suffer accelerated component aging. For network operators who have experienced field switch failures during summer heatwaves, the +85°C rating is the primary selection criterion — the management features are a secondary benefit
  • Off-Grid Solar & Battery-Backed Field Nodes — Remote monitoring stations, pipeline telemetry points, and environmental sensor networks powered by solar-charged batteries calculate their power budget in watts per device. At 0.8W idle, the IM-FS240GM consumes less standby power than a typical USB phone charger — a meaningful difference when multiplied across the 8,760 hours per year a field node draws from a finite battery reserve. The DC 9V minimum input accepts battery voltage at end-of-discharge states that would shut down a switch with a higher minimum input threshold
  • Multi-Tenant & Segmented Edge Networks — Transportation hubs, commercial buildings, and industrial parks connecting devices from multiple operators or tenants through shared fiber infrastructure require VLAN segmentation at the edge node to prevent inter-tenant traffic leakage. The IM-FS240GM provides 802.1Q VLAN isolation at the point where multiple tenants' devices connect to the shared backbone — a function the unmanaged IM-FS240FE cannot perform — in the same chassis that fits the same compact installation spaces
  • SNMP-Monitored Traffic & Railway Infrastructure — Road and rail network operators managing hundreds of field nodes through centralized NMS platforms require per-node SNMP visibility for fault detection, performance monitoring, and configuration audit. The IM-FS240GM reports link state, port statistics, ring topology status, and alarm conditions through SNMP v1/v2c/v3 to any standard NMS — enabling proactive fault detection at individual roadside or trackside nodes before a field visit is needed, with NEMA-TS2 and EN 50121-4 certifications satisfying the procurement requirements of both environments
  • Vehicle & Rolling Stock Onboard Managed Networks — Trains, trams, and buses with managed onboard networks require per-port traffic control — QoS prioritization for safety communications over passenger Wi-Fi, VLAN isolation between passenger and operational networks, port loop detection to prevent configuration errors from disabling onboard communications. The IM-FS240GM delivers all of these in a chassis sized for the space constraints of vehicle electrical cabinets, rated for the vibration and temperature range of vehicle operation, drawing 0.8W idle from the vehicle power bus
詳細を表示する