1 7

OLYCOM

Industrial Fiber Media Converter for Transparent Fast Ethernet Extension up to 120km CE Fanless

Industrial Fiber Media Converter for Transparent Fast Ethernet Extension up to 120km CE Fanless

$44.99 USD
$36.50 USD $44.99 USD
セール 売り切れ
Introduction

  • The Olycom IM-MC110FE does one thing, and it does it with absolute reliability: it converts a 10/100Mbps copper Ethernet signal into fiber — and back again — transparently, with no protocol overhead, no configuration, and no management complexity standing between your device and the fiber link.
  • Unlike a switch, a media converter introduces nothing into the data path. 
  • Whatever enters the RJ45 port exits the SFP port bit-for-bit, preserving the original frame timing, VLAN tags, and traffic characteristics of the connected device. 
  • That transparency makes it the right tool when you need to extend a single Ethernet link beyond the 100m copper limit — whether that link carries industrial control data, IP camera streams, SCADA traffic, or access control signals — across distances from 20km up to 120km on a single-mode fiber run, without touching the devices at either end.
  • Housed in the same corrugated IP40 metal enclosure as the broader IM series, powered by DC 12–52V wide-range dual input, certified to NEMA-TS2, EN 50121-4 rail traffic, IEC 60068 vibration/shock/freefall, and fully operational from -40°C to +75°C, the IM-MC110FE brings industrial-grade physical durability to what is often the most overlooked component in a field network: the copper-to-fiber handoff point.

Key Features

  • 1 × 100Mbps SFP Fiber Port — Supports single-mode transceivers (1310/1550nm up to 20km; 1490/1550nm up to 120km) and multimode (1310nm up to 2km); transceiver flexibility covers short campus links through long metropolitan extensions in a single converter platform
  • 1 × 10/100Mbps Auto-Sensing RJ45 Port — Auto-negotiates speed and duplex with the connected copper device; Auto MDI/MDIX eliminates crossover cable requirements
  • Fully Transparent Operation — Store-and-forward conversion preserves all frame data, VLAN tags, and QoS markings end-to-end; no IP address, no configuration, no management overhead — plug in and it works
  • 6KV Ethernet Surge Protection — Port-level lightning and transient protection on the RJ45 interface; essential for copper connections to outdoor-adjacent equipment and field devices exposed to induced surge events
  • IEEE 802.3x / Back Pressure Flow Control — Prevents frame loss under burst traffic conditions in both full and half duplex operation
  • DC 12–52V Wide-Range Dual Power Input — Accepts 12V, 24V, or 48V DC from any standard industrial power source; reverse polarity protection prevents damage from miswiring; ≤5W power consumption
  • -40°C to +75°C Operating Temperature — Cold-start rated and sustained high-temperature capable; storage rated to +85°C; no warm-up period required
  • NEMA-TS2 Traffic Control Certified — Meets US traffic control system qualification requirements for roadside and intersection cabinet deployment
  • EN 50121-4 Rail Traffic Certified — Qualified for trackside and onboard railway applications under European railway EMC standards
  • IEC 60068-2-6/27/32 Vibration, Shock & Freefall Certified — Mechanically validated for continuous vibration, impact events, and transport handling stresses
  • Level 3 EMS Immunity: EN 61000-4-2/3/4/5/6/8 — Full industrial electromagnetic immunity suite; FCC Part 15 Class A and EN 55022 Class A EMI compliance
  • Ultra-Compact DIN-Rail Mount — 113.8 × 93 × 34.9mm IP40 corrugated metal housing; fits inside the tightest field enclosures and instrument cabinets; CE / LVD EN60950 safety certified
  • 3-Year Warranty

Applications

  • Extending Legacy Copper Devices onto Fiber Infrastructure — The most fundamental use case: a PLC, RTU, IP camera, or access controller with only a copper Ethernet port needs to connect to a fiber backbone switch 500m, 5km, or 50km away. The IM-MC110FE sits at the device end, converts copper to fiber, and the device sees nothing but a normal Ethernet link — no driver changes, no reconfiguration, no replacement of the endpoint hardware
  • Last-Mile Fiber Handoff in Industrial Automation — Deployed at the machine or panel level where a fiber backbone terminates and a copper device begins. A pair of IM-MC110FE converters — one at the control room fiber patch panel, one inside the field equipment cabinet — creates a transparent extended Ethernet segment that behaves identically to a direct copper connection, regardless of the fiber distance between them
  • Roadside & Traffic Control Cabinet Fiber Extension — NEMA-TS2 certification makes the IM-MC110FE a qualified component inside traffic signal control cabinets and intersection equipment enclosures. A traffic controller or camera with a copper interface connects through the converter to the city’s fiber ring without any protocol adaptation or address assignment
  • Railway Trackside Copper-to-Fiber Conversion — EN 50121-4 and IEC 60068 mechanical certifications cover deployment inside wayside relay rooms and onboard rolling stock equipment bays. Where a trackside sensor, door controller, or passenger information terminal has a copper interface and the backbone is fiber, the IM-MC110FE bridges the gap without introducing latency or protocol translation overhead
  • Long-Distance SCADA & Remote Telemetry Links — Single-mode SFP compatibility up to 120km makes this converter suitable for extending SCADA polling connections to remote RTUs at pipeline stations, pump houses, and substation perimeters where the fiber run is too long for multimode but the copper endpoint device cannot be replaced
  • Building & Campus Fiber Backbone Integration — Connects copper-interface devices — older IP cameras, door access controllers, building management sensors — to a fiber-based campus backbone without replacing the endpoint hardware. Particularly valuable during staged infrastructure upgrades where fiber is being deployed floor-by-floor and existing copper devices need to remain operational throughout
  • Outdoor Pole-Mount & Junction Box Installations — The combination of 6KV surge protection, -40°C cold-start, IP40 metal housing, and IEC 60068 shock/vibration rating makes the IM-MC110FE suitable for permanent installation in outdoor junction boxes, utility pole enclosures, and exposed field equipment housings where a commercial-grade media converter would fail prematurely
詳細を表示する