1 9

OLYCOM

Compact Fast Ethernet PoE Fiber Switch Industrial Ethernet Unmanaged 120W CE

Compact Fast Ethernet PoE Fiber Switch Industrial Ethernet Unmanaged 120W CE

$59.99 USD
$65.00 USD $59.99 USD
セール 売り切れ
Introduction

  • In industrial and outdoor network deployments, the most common field node isn’t a high-port-count aggregation switch — it’s a small enclosure with one fiber connection coming in and a handful of PoE devices that need power and connectivity going out. 
  • The Olycom IM-FP144FE is engineered for precisely this scenario: 1 × 100Mbps SFP fiber uplink and 4 × Fast Ethernet PoE RJ45 ports, packaged in the smallest IP40 metal housing in the IM series at just 113.8 × 93 × 34.9mm.
  • Where Gigabit PoE switches are oversized for nodes serving legacy cameras, access controllers, and low-bandwidth sensors that will never exceed Fast Ethernet speeds, the IM-FP144FE matches the actual capability of the connected devices — keeping the installation lean, the panel space free, and the power draw minimal. 
  • The dedicated 48V PoE input supplies up to 15.4W per port (802.3af standard) across all four ports simultaneously, and the full industrial certification stack — NEMA-TS2, EN 50121-4 rail, IEC 60068 vibration/shock/freefall, Level 3 EMS immunity — ensures the switch outlasts the environment it operates in, whether that’s a roadside cabinet, a railway platform enclosure, or a building junction box in an uncontrolled mechanical environment.

Key Features

  • 1 × 100Mbps SFP Fiber Uplink — Single-mode support from 20km to 120km (1310/1550nm, 1490/1550nm); multimode up to 2km (1310nm); full transceiver flexibility for campus and metropolitan fiber runs
  • 4 × 10/100Mbps PoE RJ45 Ports — All four ports deliver IEEE 802.3af PoE (15.4W per port); 802.3at (30W) available with special power configuration; auto-detects PoE vs. non-PoE devices per port; non-PoE devices receive data only; Auto MDI/MDIX on all ports
  • Dedicated 48V PoE Power Input — Independent PoE supply input (48V, max 52V) separates switching power from PoE delivery; reverse polarity protection standard; allows the switching subsystem to remain powered even under heavy PoE load
  • 40Gbps Non-Blocking Internal Bandwidth — Store-and-forward architecture with 4MB packet buffer handles simultaneous traffic across all five ports without frame loss, despite the Fast Ethernet speed ceiling of connected devices
  • 6KV Ethernet Surge Protection — Port-level surge and lightning protection across all four RJ45 interfaces; critical for outdoor-adjacent and exposed field nodes subject to induced transients
  • ±15KV Air / ±6KV Contact ESD | ±6KV EFT | ±6KV Surge (IEC 61000-4-2/4/5) — Industrial-grade electrical immunity across all interfaces
  • Level 3 EMS Immunity: EN 61000-4-2/3/4/5/6/8 — Full immunity suite covering ESD, radiated susceptibility, EFT, surge, conducted susceptibility, and power frequency magnetic field
  • NEMA-TS2 Traffic Control Certified — Qualified for US roadside cabinet and traffic control system deployment
  • EN 50121-4 Rail Traffic Certified — Meets European railway EMC requirements for wayside and onboard applications
  • IEC 60068-2-6/27/32 Vibration, Shock & Freefall Certified — Mechanically rated for continuous vibration, impact events, and transport handling stresses
  • -40°C to +75°C Operating Temperature — Cold-start capable; storage to +85°C; no derating at temperature extremes
  • 113.8 × 93 × 34.9mm IP40 Corrugated Metal Housing — The most compact PoE fiber switch in the IM series; fits inside instrument panels, pole-mount enclosures, and junction boxes where a standard DIN-rail PoE switch will not physically fit
  • FCC Part 15 Class A / EN 55022 Class A | CE / LVD EN60950 | 3-Year Warranty

Applications

  • Four-Camera Surveillance Nodes on a Single Fiber Drop — The most direct use case: a fiber backbone run terminates at a field location where four IP cameras need power and connectivity. Rather than running individual power cables to each camera or deploying a larger switch with unused ports, the IM-FP144FE serves all four from a single DIN-rail unit. This pattern repeats across parking structures, building perimeters, highway gantries, and transit platforms — wherever four cameras cluster around one fiber termination point
  • Access Control & Entry Point Clusters — Building entry points and security checkpoints typically concentrate multiple devices in a small area: a door controller, a card reader, an IP intercom, and a camera. The IM-FP144FE powers and connects all four from a single fiber-connected unit installed inside the entry point junction box, eliminating the need for a separate PoE injector or power adapter at each device
  • Roadside & Traffic Infrastructure Micro-Nodes — NEMA-TS2 certification qualifies the IM-FP144FE for installation inside traffic signal controller cabinets and intersection equipment enclosures where space is tightly managed. Four PoE ports serve a typical small intersection device cluster — a camera, an inductive loop detector interface, a wireless module, and a controller — from one compact switch occupying minimal cabinet rail space
  • Railway Platform Equipment Enclosures — EN 50121-4 rail certification and IEC 60068 mechanical validation cover deployment inside compact platform junction boxes and wayside relay enclosures where a four-device cluster — platform camera, passenger counter, emergency call point, and PA terminal — needs PoE connectivity from a single fiber drop, and physical space constrains the choice of switch hardware
  • Solar & Off-Grid Remote Monitoring Stations — At remote environmental monitoring, agricultural telemetry, and pipeline surveillance stations fed by solar-charged battery banks, the IM-FP144FE’s 48V PoE input integrates cleanly with standard solar charge systems, its Fast Ethernet speed ceiling matches the actual data rates of the connected sensors and cameras, and its minimal enclosure size suits the compact weatherproof housings typical of off-grid field installations
  • Industrial Machine Vision & Quality Control Cells — Production line inspection stations where two to four Fast Ethernet cameras monitor component quality, barcode verification, or assembly alignment connect through the IM-FP144FE to the factory fiber backbone. The compact DIN-rail form factor fits inside the machine enclosure itself rather than requiring a separate networking cabinet
  • Smart Building Edge Nodes in Concealed Spaces — Ceiling voids, service ducts, and riser cupboards in commercial buildings often have very limited space for networking equipment. The IM-FP144FE’s 34.9mm depth and 113.8mm width allow it to be installed in locations where nothing larger would fit, connecting floor-level BMS sensors, IP cameras, and access devices to the building fiber backbone without requiring a dedicated comms room at each riser point
詳細を表示する